Aqua-Pure Twin Whole House Water Filter System AP212

drinking water filter systems for great tasting water & cyst protection

features

• The AP212 whole house filter system is complete with dirt/rust and taste/odour cartridges, ready to use immediately

• Unrestricted flow design and 3/4” connection provides a flow rate of up to 30 lpm with incoming pressure of 700kPa or greater

• The AP212 is designed, fully assembled and tested in Australia

benefits

• Provides clean, clear water throughout the whole house. A must for all new and existing homes

• Reduces taste/odour, chlorine, allergens and organic matter. Improving the quality of water used for drinking, cooking, bathing and washing

• Protects household plumbing and extends the life of faucets, hot water services and appliances by removing abrasive dirt, rust and sediment

• Easy to install, complete with isolating valve

• Three year warranty

The Aqua Pure AP212 is designed to be installed on the main water line after the garden tap, prior to entering the house.
The unit is designed for pipework to enter on the left hand side of the system.

(pipework may have to be modified to facilitate such fitting) The system is supplied with a complete set of filter cartridges.
Essential installation note: The AP212 is designed for use on microbiologically safe water only.

Allow a minimum of 50mm gap under the sump for cartridge replacement.

A certified dual check valve should be installed in conjunction with a 500kPa pressure limiting valve (not included), should the mains pressure exceed 900kPa (130psi).

Essential installation note: The AP212 is designed for use on microbiologically safe water only. Allow a minimum of 50mm gap under the sump for cartridge replacement. A certified dual check valve should be installed in conjunction with a 500kPa pressure limiting valve (not included), should the mains pressure exceed 900kPa (130psi).

• • Part no. 110465-00

  • Micron 5 (nominal)

  • Height 620mm

  • Width 350mm

  • Inlet connection size 3/4” BSPF

  • Outlet connection size 3/4” BSPM

  • Max. Flow Rate 30 lpm

  • Max. Pressure 900 kPa (130psi)

  • Max. Temperature 40℃.

MORE INQUIRY? Please Call 1300 767 072 or Simply Email to sales@buyfridgefilters.com.au FRIDGE FILTER SUPPLIER http://buyfridgefilters.com.au