Big Blue Twin Water Filter System with Filters 10" x 4.5"

10 Inches Big Blue Twin Water Filter Housing, CTO Carbon Block and Sediment Water Filter

Kit includes
10" Big Blue Twin Water Filter Housing(+Metal Bracket Heavy Duty, 2X 1"-3/4" Bushing), 1X 5 Micron CTO Carbon Block AP815-WF, 1X 5 Micron PP Sediment Water Filter ABPP1045-5, 1 x Housing Wrench

More details

Total $189.00-Each

Average votes for this product

Average : 0 / 5
Based on 0 customers advices.

Post a review

More info
Reviews (0)

Big Blue Twin Water Filter System with Filters 10" x 4.5"

Installed at the main water supply to treat all the water you use in your entire home. Aqua Blue H20 Whole house system could Enjoy better water from every tap and every appliance in the whole house. In addition to the basic features of sediment, chlorine and odor removal, this system also excels in the reduction of iron and manganese residue to protect your home appliances, such as the dishwasher and washing machine.
10" Big Blue Twin Whole House Water Filtration System - this water treatment system treats all of the water entering your home, removing sand, silt, sediment, rust and other particles that can damage your water softener, prematurely foul carbon filters or ruin the plumbing fixtures and valves.
AB TWIN BIG BLUE Housing system effectively eliminates many impurities from tap water to offer sparkling clean and great tasting water throughout your whole house.

Kit includes
• 10" Big Blue Twin Water Filter Housing(+Metal Bracket Heavy Duty, 2X 1"-3/4" Bushing)
• 1X 5 Micron CTO Carbon Block AP815-WF
• 1X 5 Micron PP Sediment Water Filter ABPP1045-5
• 1 x Housing Wrench

10"X4.5" Polyspun Polypropylene Sediment Cartridge - 5 Mic Water Filter

General-purpose spun polypropylene sediment filter cartridge.

Fits in most standard 10" drop-in filter housing systems. Used in residential, commercial, and food-service applications as a sediment filter or pre-filter.

10 x 4.5 Sediment replacement filter 5 micron x1 Suits all standard 10 inch housings Premium filtration poly spun Suitable for countertop or undersink water filter models.

Features & Benefits
• The filter is 3-layer density type. The service life is 30% higher than the general sediment filter. Accurate micron rate control. The outer layer is 10 micron; the inner layer is 5 micron; the middle layer is 7 micron. 5 micron Particle removal rate is over 95%
• 100% Fresh Polypropylene.BPA Free
• Manufacturered by fully automatic production line.Accurate and absolute micron rate control.

Applications
• Food and beverages
• Oil and gas
• Electronics
• Reverse Osmosis Pre filtration
• Fine chemicals
• Metal finishing
• Pulp and paper

Specifications
• Model Number: AB-PP1045
• Micron Rating: 5 Micron
• Min/Max Flow: 0 - 154 Lpm
• Min/Max Temperature: 0-52°C
• Min/Max Pressure: 100 - 800 kPa
• Size: Standard 4.5” x 10”
• Filtration Life: 6 Months
*Depends on water quality and level of contaminants.

Directions: Flush after installation for 5 minutes. For best results, change cartridge at 6 monthly intervals.
Caution: Do not use with microbiologically unsafe water without adequate disinfection.
Warning: For correct operation of this, it is essential to observe manufacturers instructions.

Premium Big White Big Blue 5 Micron Carbon Block Filter 10"X4.5" AP815-WF

The Aqua Blue H20 Carbon Block 5 Micron filter is a Premium nominal carbon block filter cartridge made from 100% Coconut Carbon for the reduction of chlorine and removal of tastes, odours and potentially toxic chemicals.
Suitable for most applications including whole house, tank and dam systems.

4.5"x 10" Chlorine Taste & Odor Reduction / CTO Carbon Filter 5 Micron

Features & Benefits
• Effectively reduce unwanted tastes, odor, chlorine
• Cleaner, softer water for bathing, cleaning, washing
• No channeling, fluidizing, and bypassing
• Maximum service life and resistance to fouling
• Protects other water filters, heaters and appliances from sediment

Applications
• Food and beverages
• Oil and gas
• Electronics
• Reverse Osmosis Pre filtration
• Fine chemicals
• Metal finishing
• Pulp and paper

Specifications
• Model Number: AP815-WF
• Max. Flow: 0.75 gpm
• Max. Pressure: 120 psi
• Max. Temperature: 104°F
• Suggested Life: 3500 gal
• Micron rating: 5 Micron
• Size: Standard 4.5” x 10”
*Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.

Directions for use: Place cartridge in an appropriate housing(10"x4.5") and flush for a minimum of 5 minutes prior to use. This will flush away any loose particals that may be present in the cartridge. These particals are known as carbon fines.
Caution: Do not use with microbiologically unsafe water without adequate disinfection.
Warning: For correct operation of this, it is essential to observe manufacturers instructions.