FMP600 kPa Filtamate® - Pressure Limiting Valve

Apex Filtamate FMP600 PRV Water Pressure Reducing + Back Flow Prevention Device

More details

FMP600

Total $52.95-Each

On sale


Average votes for this product

Average : 0 / 5
Based on 0 customers advices.

FMP600 kPa Filtamate® 

- Pressure Limiting Valve

Apex Filtamate FMP600 PRV Water Pressure Reducing + Back Flow Prevention Device

Features/Benefits : 

  • Apex Filtermate FMP600 kpa in-line plastic pressure limiting valve with built-in John Guest push-in fittings suits 1/4" plastic tubing or 1/4" copper pipe.
  • Ideal for water filters and fridges etc.
  • Apex has the best flow rate of all PLVs and doesn't restrict the flow.
  • Built-in non-return dual check valve. Mounting bracket included.
  • Made in New Zealand.



 

Standards :

  • NZ Building Code G12 (2001)
  • NZS 4608:1992
  • Watermark Approval AS 1357.2 Lic. 02596
  • Highly recommended when installing water filter systems

 

 

Product Description :

  • Apex 600Kpa Pressure Limiting valve - Pressure Reducing valve - Pressure Reduction Valve with 1/4" John Guest Push Fit Fittings In and Out
  • Reduces pressure to 600 Kpa
  • Suitable for High pressure systems to protect drink dispensers e.g. Water filters, ice makers, coffee machines and reverse osmosis machines.

 

 

Installation :

  • Installation must be carried out by a Qualified Person.
  • All pipe work must be flushed prior to installation.
  • Do NOT apply heat near valve during installation.
  • Must be fitted downstream of approved isolating valves.
  • Must be installed in the direction as indicated by the flow arrow.
  • Must be protected by a line strainer (See specifications and product codes for valves with integral line strainer).
  • Must be installed according to local regulations.
  • May be fitted in any orientation.
  • Warranty is limited to any fault found in a valve due to poor workmanship or materials that is returned to Apex Valves Ltd within 1 year from the date of manufacture.
  • If thermal expansion (due to heating, cooling) or back pressure can occur downstream, an expansion valve must be fitted to relieve the excessive pressure build up.



Note:The FiltaMate valve opens and closes automatically every time water is drawn through it. As it is a mechanical device we recommend that it is replaced every 5 years or sooner in high usage installations.

 



FMBP 350 kPa Filtamate® Specifications :

Inlet 15mm, 1/2" BSP (female)
Outlet 1/4" John Guest connector
Length 100mm
Flow Rate 14 L/min at 700 kPa [100psi] inlet pressure
Check Valve 10:1 (for every 10 kPa [1.5psi] increase in inlet pressure above 1000 kPa [150psi], the outlet pressure will increase by 1 kPa [0.145psi]).
Outlet Pressures 600 kPa +/- 10% @ 1000 kPa [150psi] inlet pressure
Max inlet pressure 1600 kPa [230psi]
Max temperature 40°C [105°F]
Min temperature 1°C
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.




IF YOU ARE NOT SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT





MORE INQUIRY?

Please Call 1300 767 072 or
Simply Email to [email protected]

FRIDGE FILTER SUPPLIER
http://buyfridgefilters.com.au








Free Shipping   Warranty & Return
Feedback   Payment
 

 

APEX FMP 350kPa Filtamate®

PRESSURE LIMITING VALVE VIDEO GUIDE

 

 
FMP600 kPa Filtamate® - Pressure Limiting Valve

FMP600 kPa Filtamate® - Pressure Limiting Valve

Apex Filtamate FMP600 PRV Water Pressure Reducing + Back Flow Prevention Device

Write a review !


*





No reviews at this time.





FMP600 kPa Filtamate® - Pressure Limiting Valve (52.95 AUD)

PayPal