Home

FMP350 Filtamate® - Pressure Limiting Valve

FMP350 Filtamate® - Pressure Limiting Valve

The APEX 350 kpa valve is state of the art valve incorporation Pressure Limiting and Dual Check Functions.

More details

FMP350

Total $39.00-Each

On sale

RRP:$58.25 per 1 ea


Average votes for this product

Average : 0 / 5
Based on 0 customers advices.

FMP350 Filtamate® - Pressure Limiting Valve

The APEX 350 kpa valve is state of the art valve incorporation Pressure Limiting and Dual Check Functions.

Features/Benefits : 

  • Integral dual check valves help prevent backflow
  • FiltaMate resists water hammer and limits water pressure to filters thus avoiding costly water damage
  • FMP supplied with fixing clip and screw





Standards :

  • Australian Watermark Approval AS1357.2 Lic. 02596
  • Complies with NZS 4608:1992
  • Australian Standard Approved, conforms to AS28454.1
  • In addition the apex valve is also designed to inhibit downstream pressure build-up by water hammer protecting against backflow

 

 

Product Description :

  • Designed to be used on water filtration systems only. This Apex valve has been designed to limit downstream pressure on water filters, fridges with ice machines etc.
  • Reduces pressure to 350 Kpa.
  • Comes with quick connect couplings 1/4".
  • This valve is used in all our water filter system as standard, if you see kits on the market without a Pressure Limiting Valve do not buy them for use on town water, they are inferior.
  • High pressure systems to protect downstream components, e.g. Water filters, drink dispensers, ice makers, coffee machines and reverse osmosis machines.

 



Installation :

  • Installation must be carried out by a Qualified Person.
  • All pipe work must be flushed prior to installation.
  • Do NOT apply heat near valve during installation.
  • Must be fitted downstream of approved isolating valves.
  • Must be installed in the direction as indicated by the flow arrow.
  • Must be protected by a line strainer (See specifications and product codes for valves with integral line strainer).
  • Must be installed according to local regulations.
  • May be fitted in any orientation.
  • Warranty is limited to any fault found in a valve due to poor workmanship or materials that is returned to Apex Valves Ltd within 1 year from the date of manufacture.
  • If thermal expansion (due to heating, cooling) or back pressure can occur downstream, an expansion valve must be fitted to relieve the excessive pressure build up.



Note:The FiltaMate valve opens and closes automatically every time water is drawn through it. As it is a mechanical device we recommend that it is replaced every 5 years or sooner in high usage installations.



FMP 350 Filtamate® Specifications :

Inlet ¼" John Guest connector
Outlet ¼" John Guest connector
Length 98mm
Flow Rate 14 L/min at 700 kPa [100psi] inlet pressure
Check Valve 10:1 (for every 10 kPa [1.5psi] increase in inlet pressure above 1000 kPa [150psi], the outlet pressure will increase by 1 kPa [0.145psi]).
Outlet Pressures 350 kPa [50, 60 and 85psi] +/- 10% @ 1000 kPa [150psi] inlet pressure
Max inlet pressure 1600 kPa [230psi]
Max temperature 40°C [105°F]
Min temperature 1°C
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.




IF YOU ARE NOT SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT





MORE INQUIRY?

Please Call 1300 767 072 or
Simply Email to sales@buyfridgefilters.com.au

FRIDGE FILTER SUPPLIER
http://buyfridgefilters.com.au








Free Shipping   Warranty & Return
Feedback   Payment
 

 

APEX FMP 350kPa Filtamate®

PRESSURE LIMITING VALVE VIDEO GUIDE

 

 
FMP350 Filtamate® - Pressure Limiting Valve

FMP350 Filtamate® - Pressure Limiting Valve

The APEX 350 kpa valve is state of the art valve incorporation Pressure Limiting and Dual Check Functions.

Write a review !


*



No reviews at this time.





FMP350 Filtamate® - Pressure Limiting Valve (39 AUD)

PayPal